A place to document and share things I do

Tag Archives: WA0EDA


Here is a problem I’ve run into several times now and it seemed to warrant a blog post. An MTR2000 that has previously worked great with the STM32-DVM-MTR2K seems to magically stop decoding. The only tell-tale symptom to be found Read more…


This is a common question I’ve been asked about both the STM32-DVM-MASTR3 and the STM32-DVM-MTR2K. When I went digital, I went pretty hard core. I haven’t had a ham repeater controller for a few years now. My brother Gavin, N0ECQ Read more…


I’ve had a few requests from folks who want to build their own STM32-DVM-MTR2K boards. While it’s not for the faint of heart, I have decided to make the necessary files available. This article is just as much a story Read more…


In the fourth installment on the STM32-DVM-MTR2K, I want to take a deeper dive into the system and go through two ways up update the firmware on the MODEM. One is manual, and the other is automated, which you can Read more…


(Editor’s note: This is the third installment of our series of posts on the Motorola MTR2000 repeater and MMDVM board. All articles in this series can be found by searching the “MTR2K” category.) — Justin, NV8Q It’s something that I Read more…


(Editor’s note: This is the second installment of our series of posts on the Motorola MTR2000 repeater and MMDVM board. There will be future posts covering different aspects of the MTR2000/MMDVM integration. All articles in this series can be found Read more…